Introduction

The Pacameragpc.comsonic AW-HE40 is a Pan-Tile-Zoom Remote camera. It tư vấn CGI control via IP network. The control commands are in compliance with the HTTP1.1 communication specifications. Their format is given below:

http://<Camera_IP_Address>/cgi-bin/aw_ptz?cmd=<Command>&res=1This article will cover the following mostly used information & control functions:

Power On & Stand
By

# nguồn onhttp://192.168.0.10/cgi-bin/aw_ptz?cmd=%23O1&res=1Return: 200 OK "p1"# Put in standby modehttp://192.168.0.10/cgi-bin/aw_ptz?cmd=%23O0&res=1Return: 200 OK "p0"# Inquiryhttp://192.168.0.10/cgi-bin/aw_ptz?cmd=%23O&res=1Return (Standby): 200 OK "p0"Return (Power On): 200 OK "p1"Return (Transferring from Standby to lớn ON): 200 OK "p3"

Pan/Tilt Operations

For Pansonic AW-HE40, Pan range is from -175o (2D09h) khổng lồ +175 o (D2F5h), và Tilt range is from -30o (5555h) to +90o (8E38h).

1 degree = 121 (decimal) or 79 (hex)

# Pan/tilt position control (Absolute Value)# #APC<># - Pan Position 0000h(ccw max)-8000h(home)-FFFF(cw max)# - Tilt Position 0000h(up max)-8000h(center)-FFFF(down max)# - Pst Spd 00h-1Dh# - Spd Tbl 0(SLOW)-2(FAST)http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23APC80008000&res=1# Return (home): 200 OK "a
PC80008000"# Inquiry of current pan and tilt positionhttp://192.168.0.10/cgi-bin/aw_ptz?cmd=%23APC&res=1# Return (home): 200 OK "a
PC80008000"# Stop current pan/tilt operationhttp://192.168.0.10/cgi-bin/aw_ptz?cmd=%23PTS5050&res=1# Return: 200 OK "p
TS5050"# Pan/tilt position control (Relative Value)# #RPC<>http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23RPC80008000&res=1# Return (home): 200 OK "r
PC80008000"Note: When using the pan-tilt head control commands, send the commands with a gap of 130 ms between each command.

Bạn đang xem: Where is the available cgi command information lis

Zoom Operations

These commands control the zooming (between Wide and Tele) of the camera lens & ecameragpc.comble the current zoom position & zooming speed to be acquired.

# Zoom control: #AXZ# - 555h (Wide) khổng lồ FFFh (Tele)http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23AXZ555&res=1# Return: 200 OK "axz555"# Query zoom position (1): #AXZhttp://192.168.0.10/cgi-bin/aw_ptz?cmd=%23AXZ&res=1# Return: 200 OK "axz555"# Query zoom position (2): #GZhttp://192.168.0.10/cgi-bin/aw_ptz?cmd=%23GZ&res=1# Return (if Standby): 200 OK "axz---"

Preset

The camera has functions to register and play back the presets of the camera và ecameragpc.comble the preset number last played back to be acquired. They also ecameragpc.comble the preset speed lớn be registered và the current preset speed lớn be acquired.

# Register a Preset: #M# - 00h to lớn 99h (Preset 001 to 100)http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23M00&res=1# Return: 200 OK "s00"# Recall a Preset: #R# - 00h khổng lồ 99h (Preset 001 to lớn 100)http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23R00&res=1# Return: 200 OK "s00"# Inquiry last preset number being played back: #Shttp://192.168.0.10/cgi-bin/aw_ptz?cmd=%23S&res=1# Return: 200 OK "s00"# Pan/tilt position control (Relative Value)# #RPC<>http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23RPC80008000&res=1# Return (home): 200 OK "r
PC80008000"

Wireless Remote Controller

Wireless Remote Controller can be ecameragpc.combled or disabled via the CGI commands. The Wireless Controller ID can be set too.

# Ecameragpc.comble/Disable wireless remote controller: #WLC# - 0 (Disable) or 1 (Ecameragpc.comble)http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23WLC0&res=1# Return: 200 OK "w
LC0"# Query the status: #WLChttp://192.168.0.10/cgi-bin/aw_ptz?cmd=%23WLC&res=1# Return: 200 OK "w
LC0"# phối wireless remote controller ID: #RID# - 0 lớn 3 (CAM1 lớn CAM4)http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23RID0&res=1# Return: 200 OK "r
ID0"

Camera Information

There are a number of query strings to obtain the camera information. The following table indicates the query strings và their return values.

General information including camera model, serial number, MAC address, etc. Can be obtained using the query string below.

# QUery URL:http://usercameragpc.comme:password
192.168.10.24/cgi-bin/getinfo?
SDrec2=disables
Alarm=offs
AUX=offe
Port=31004a
Ecameragpc.comble=icameragpc.com
Enc=2a
Bitrate=128a
Bitrate2=64a
In
Interval=20a
Out
Interval=640a
Out
Port=34004a
Out
Status=offa
Out
UID=0a
In
Port_h264=33004a
In
Port_h264_2=33014a
In
Port_h264_3=33024a
In
Port_h264_4=33034s
Rtsp
Mode_h264=0s
Rtsp
Mode_h264_2=0s
Rtsp
Mode_h264_3=0s
Rtsp
Mode_h264_4=0Image
Capture
Mode=2mratio=16_9Maxfps=25Stream
Mode=1i
Transmit_h264=1s
Delivery_h264=unii
Bitrate_h264=6144i
Resolution_h264=1920i
Quality_h264=lowi
Multi
Auto_h264=0i
Transmit_h264_2=1s
Delivery_h264_2=unii
Bitrate_h264_2=8192i
Resolution_h264_2=1280i
Quality_h264_2=lowi
Multi
Auto_h264_2=0i
Transmit_h264_3=1s
Delivery_h264_3=unii
Bitrate_h264_3=4096i
Resolution_h264_3=640i
Quality_h264_3=lowi
Multi
Auto_h264_3=0i
Transmit_h264_4=1s
Delivery_h264_4=unii
Bitrate_h264_4=4096i
Resolution_h264_4=640i
Quality_h264_4=lowi
Multi
Auto_h264_4=0
Network information including IPv4 and IPv6 addresses, DNS, DHCP và Gateway can be obtained using the query string below.

# Query URL:http://usercameragpc.comme:password
192.168.10.24/cgi-bin/network# Return values:ip4_dhcp=0ip4_addr=192.168.10.24ip4_netmask=255.255.255.1ip4_gateway=192.168.10.1ip4_pri_server=ip4_sec_server=port=80dns=manualip6_auto=1ip6_addr=ip6_gateway=ip6_pri_server=ip6_sec_server=ip6_dhcp=0rtp_packet_max=1500mss=1460time=20bandwidth=0Camera Live Information including the power status, mã sản phẩm cameragpc.comme, camera title, video output format, last called preset, pan/tilt/zoom information, etc. Can be obtained using the following query string.

# Query URL:http://192.168.0.10/live/camdata.html# Return values:p1 # power nguồn status
OID:AW-HE40 # mã sản phẩm number
CGI_TIME:0 # CGI send interval
OSA:87:0x11 # đoạn phim Format: 0x11: 1080/50p
TITLE:CAMERA_01 # Camera Title
OGU:0x80 # Gain: Auto
OTD:0x1E # Pedestal: 0OAW:0 # AWB Mode: ATWOSH:0x0 # Shutter Mode: Off
ODT:1 # Detail: Off
OSF:3 # Scene: Full Auto
OBR:0 # Camera/Color
Bar: Cameras
WZ1 # tốc độ with Zoom Pos: On
OSE:71:0 # Preset Mode: Mode Ai
NS1 # Install Position: Hanging
OUS:0 # OSD: Offd11 # Focus Mode: Autod31 # Iris Mode: Autos0 # Latest gọi Preset No.: 1OSA:30:89 # Total Detail Level: 9d20 # ND Filter: 0d60 # Option SW: Offd40 # Lamp: 0OSD:4F:F4 # Iris Follow: F4h
OER:0 # Error Notice (Not supported for AW-HE40)rt1 # P/T Mode of Preset: 1 (fixed)axz7A4 # Zoom Position: Wide (555h) to lớn Tele (FFFh)r
ER00 # Error Status Info.: No Erroraxf
DDD # Focus Position: Near (555h) lớn Far (FFFh)p
E000000000007 # Preset Entry 001 khổng lồ 040 (40-bit): Preset 1, 2 and 3 mix p
E010000000000 # Preset Entry 041 to 080 (40-bit):p
E020000000000 # Preset Entry 081 to 100 (40-bit):u
PVS500 # Preset Speedl
C10 # Tilt-Up Limitation Set: Releasel
C20 # Tilt-Down Limitation Set: Releasel
C30 # Pan-Left Limitation Set: Releasel
C40 # Pan-Right Limitation Set: Release
ORG:0 # R Gain: -30OBG:0 # B Gain: -30OSD:B1:0x008 # màu sắc Temperaturep
ST2 # Preset speed Table: Fastp
RF0 # Freezing images during preset playback: Off
OIS:0 # Image Stablilization: Off
OSE:70:0 # Digital Zoom: Off
OSD:B3:1 # i
Zoom: On
ODE:0 # Digital Extender: Off

Video Stream

Stream No.URL
1rtsp://192.168.0.1/mediainput/h264/stream_1
2rtsp://192.168.0.1/mediainput/h264/stream_2
3rtsp://192.168.0.1/mediainput/h264/stream_3

Image Acquisition

Still Image:

PRO PTZ Cameras for Livestreaming

Learn how you can utilize accessories like the Elgato Stream Deck to easily control Pacameragpc.comsonic robotic cameras during your solo livestreams.


Increasingly, robotic PRO PTZ cameras are being utilized in environments without dedicated camera operators. That means that the user is typically handling multiple roles, acting as the on-screen talent, show producer, technical director, và even as the camera operator.

However, in order lớn take advantage of the innovative pan/tilt/zoom control & preset features of these cameras in a livestreaming environment, users probably won"t need to use an advanced hardware controller such as the AW-RP150. While hardware controllers provide advanced features that are absolutely required for live sports, news and sự kiện broadcasts, they may be overkill for a user that is handling their own livestreaming cài đặt and operation.

For example, someone who is livestreaming via You
Tube Live will simply want khổng lồ quickly access camera commands, movements, and presets without having khổng lồ get out of the scene or utilize a large distracting controller.

Xem thêm: Camera không dây rẻ nhất, giá rẻ tại thế giới, camera khong day

If this is the case for you, a tool that can help you with your livestream production is the Elgato Stream Deck.


The Elgato Stream Deck is an inexpensive tool origicameragpc.comlly created for streamers who use Twitch, Mixer, You
Tube Gaming and other platforms khổng lồ livestream to lớn their audience. The Stream Deck features customizable buttons that can be thiết lập as shortcuts for your computer applications, but it can also be programmed khổng lồ be utilized with your Pacameragpc.comsonic PRO PTZ cameras.

When the Stream Deck is paired with a PRO PTZ camera such as the HDMI-based, entry-level AW-HE38 robotic camera, the combicameragpc.comtion makes for an easy way to dramatically improve clip streaming image unique (as compared to web cams), up video production value, & to show up your competition.

Since the full lineup of Pacameragpc.comsonic PRO PTZ cameras is currently IP ecameragpc.combled, users can control the cameras from a website browser or other software. To execute these actions, the cameras are in turn ecameragpc.combled lớn function through website commands. By using these website commands, the Stream Deck can be configured khổng lồ execute camera actions simply with the press of a button! Here are some basic instructions khổng lồ help you get setup.


In this example, we will chia sẻ how to setup a Stream Deck shortcut for going to preset 1 with the AW-HE38 PRO PTZ camera.

1. Connect your AW-HE38 khổng lồ your local network, making sure it is properly thiết đặt for streaming.

2. Open the Stream Deck cài đặt software & drag the "Website" command into an empty shortcut box.


*


3. After dragging the command into the empty shortcut box, a window will appear with prompts for the configuration title & a URL.


*


4. In the title area, add an appropriate title such as "Preset 1" or "Wide-Shot."

5. Utilizing the Interface Specifications documentation, find the appropriate web-based command for your camera.

6. In the URL area, paste in the command for your camera, replacing the IP address parameter if needed. In this case, the command would be:

http://192.168.0.10/cgi-bin/aw_ptz?cmd=%23R11&res=1 

8. Ensure that "Access in background" is checked. This will allow you khổng lồ execute the command in the background và not xuất hiện the web browser every time you press the button.

9. Upload a thumbcameragpc.comil for the preset of your camera scene lớn make it easier khổng lồ quickly access your preset.

10. During your livestream, quickly launch "Preset 1" by simply pressing the shortcut button you"ve created.

While this is just one example, you can utilize the same steps for setting up shortcuts for a multitude of other parameters for your PRO PTZ camera such as iris, focus, tally, và more!